8 products
8 products
Lamson Liquid 2 - #5/6 Reel set with 2 spare spools - Smoke
WWL-LQSET-2
Regular price $399.99
$399.99
or 4 fortnightly payments of $99.99
×
Tax included.
Shipping calculated at checkout.
Let™s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc.
Well . . . not necessarily.
When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can™t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process.
We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it™s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels.
| Model | Diameter | Width | Weight | Line Weight | Capacity |
|---|---|---|---|---|---|
| Liquid 2 3-pack | 3.61" | 1" | 4.65oz | 5/6 | 100 yds 20# |
Lamson Guru Silver Fly Reel
WWL-G3.5
Regular price $449.99 Sale price $314.99 Save $135.00
$314.99
or 4 fortnightly payments of $78.74
×
Tax included.
Shipping calculated at checkout.
Guru is our very popular, lowest-priced fully machined reel now in its third generation with updated spool geometry for better retrieve rates, open porting to reduce weight and improve line drying and an integrated counter balance for structural stability. Guru sets the standard for CNC machined quality and reliability at a great price. Manufactured in the U.S.A. and assembled in Boise, Idaho.
MODEL to be chosen from menu, based on your requirements.
Lamson Guru 7+ (7/8) - Arctic
WWL-G-B-7+
Regular price $549.99
$549.99
or 4 fortnightly payments of $137.49
×
Tax included.
Shipping calculated at checkout.
Guru is our very popular, lowest-priced fully machined reel now in its third generation with updated spool geometry for better retrieve rates, open porting to reduce weight and improve line drying and an integrated counter balance for structural stability. Guru sets the standard for CNC machined quality and reliability at a great price.
Manufactured in the U.S.A. and assembled in Boise, Idaho.
Specs -
- Model - 7+
- Diameter - 3.97"
- Width - 1.13"
- Weight - 5.04 oz
- Rod - 6,7,8
- Line - WF8
- Capacity - 180 yards #20
Lamson Speedster - Midnight
WWL-S-M-5+
Regular price $599.99
$599.99
or 4 fortnightly payments of $149.99
×
Tax included.
Shipping calculated at checkout.
The Lamson Speedster S is a super-high retrieve rate reel. It features a narrower spool, inboard mounted handle and an outer diameter significantly larger than Lamson's highest performing reels. The narrow spool prevents line barreling, while the inboard handle and added circumference improve retrieve rate. Rev these features up with classic Waterworks-Lamson styling, ultra-light cage, high performance and a maintenance-free drag system—and you have the new generation Speedster
The S series reels have re-designed spool architecture that maintains this high level of performance while reducing overall weight by 20%. Manufactured in the U.S.A. and assembled in Boise, Idaho.
- Super Arbor
- Machined 6061 Aluminum, Stainless Steel
- Type II Anodize
- Sealed Conical Drag
- US Made, Idaho Built
| MODEL | DIAMETER | WIDTH | WEIGHT | ROD | LINE | CAPACITY |
| 5+ | 3.65" | 1.00" | 3.83 oz | 4, 5, 6 | WF6 | 100yds #20 |
| 7+ | 3.97" | 1.12" | 4.73 oz | 6, 7, 8 | WF8 | 180yds #20 |
Lamson Liquid 3.5 - #7/8 Reel set w/2 spare spools - Smoke
WWL-LQSET-3.5
Regular price $419.99
$419.99
or 4 fortnightly payments of $104.99
×
Tax included.
Shipping calculated at checkout.
Let™s face it, die cast reels are intended to be low cost alternatives to a machined reel, right? Imported, heavier, easier to damage, plain Jane, etc.
Well . . . not necessarily.
When we started creating Liquid we focused purely on the virtues and advantages a pressure-cast process can offer. Structurally you can do things with casting that you can™t machine, such as full radiused compound curves, near zero-radius inside corners, and for precise fit and finish you can go back and machine the cast part in critical areas amplifying the best aspects of the process.
We pushed back on other boundaries as well. How much of a reel at this price can we make here in the U.S.? Quite a lot as it turns out, and it™s a good mix. These high quality castings are imported, but the components critical to the drag system are CNC-machined here in the U.S. Liquid reels are assembled in Boise alongside our highest priced reels.
| Model | Diameter | Width | Weight | Line Weight | Capacity |
|---|---|---|---|---|---|
| Liquid 3.5 3-pack | 3.85" | 1.14" | 5.38oz | 7/8 | 200 yds 20# |
Lamson Remix Fly Reel
WWL-RX5/6
Regular price $319.99
$319.99
or 4 fortnightly payments of $79.99
×
Tax included.
Shipping calculated at checkout.
A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish, delivers both value and sex appeal.
Reel Specs:
Model: Remix 2
Diameter: 3.61"
Width: 1"
Weight: 4.78oz
Line Weight: 5/6 or 8/9
Capacity: 100yds 20#
Lamson Guru 5+ (5/6) Olive Fly Reel
WWL-G-O-5
Regular price $499.99
$499.99
or 4 fortnightly payments of $124.99
×
Tax included.
Shipping calculated at checkout.
Guru is our very popular, lowest-priced fully machined reel now in its third generation with updated spool geometry for better retrieve rates, open porting to reduce weight and improve line drying and an integrated counter balance for structural stability. Guru sets the standard for CNC machined quality and reliability at a great price. Manufactured in the U.S.A. and assembled in Boise, Idaho.
MODEL - 5+ DIAMETER - 3.55" WIDTH - 1.00" WEIGHT - 4.41 oz ROD - 4, 5, 6 LINE - WF6 CAPACITY - 100 yds #20
