Boating Lights & Electrical

Schumacher SL1317 LITHIUM JUMPPACK 55.5Wh - 1000A

Ideal for cars up to 10 cylinders, the Schumacher SL1317 1000 Peak Amp Lithium Ion Jump Starter with USB Portable Power Port provides a quick jump start in emergencies. In a compact case, this unit offers 1000 Peak Amps of power. The lithium polymer battery provides longer life and more charge cycles. Safety features include spark-free protection against overcurrent, short-circuit, overload, overvoltage and overcharge. This unit comes with an LCD display with power button, 3A input/output USB port, Qualcomm Quick Charge 3.0 Technology port and 2.4A USB port for charging your smartphones, tablets, and electronics. Also includes a built-in 3-mode LED light. Schu Eco Energy meets the highest industry standards. DOE compliant.

- Delivers 1000 Peak Amps to quickly jump start your car
- Safe smart cables and clamps provide spark-free protection against overcurrent, short-circuit, overload, overvoltage and overcharge
- Built-in 3-mode LED light and LCD display with power button
- Features 3A input/output USB port, Qualcomm Quick Charge 3.0 Technology port and 2.4A USB port
- Contains lithium polymer battery which provides longer life and more charge cycles

Schumacher SL1327 LITHIUM ION FUELPACK 37.0Wh - 800A

Works with 8 cylinder cars-  Greast for emergencies and charging portable devices

- Quickly jump start vehicles in emergencies
- Lithium Polymer battery: Provides longer life and more charge cycles
- Safe smart cable/clamps: Spark-free protection against overcurrent, short-circuit, overload, overvoltage and overcharge
- LCD display with power button
- Compact design with soft-touch finish
- Qualcomm® Quick Charge 3.0 Technology port
- 2.4A USB port - Fast charging for all USB devices, including smartphones, mp3 players and tablets
- Built-in 3-mode LED light
- Schu Eco Energy - meets the highest industry standards
- DOE compliant
- Contents: (1) SL1327 jump starter/power pack (1) SA861 Smart cable with clamps (1) USB to Micro USB charging cable (1) Travel bag (1) manual

SA831 12V Ring Terminal Battery Indicator Cable: Provides Instant Indication of Battery Status For 12V Batteries

- Durable design for outdoor and under-the-hood environments
- Ring terminals connect quickly and easily to battery
- 24-inch, 18 AWG cable
- 3-color battery status LED provides 24/7 battery health information
- Pass-through quick connector for charging battery
- Weather-guard cap
- 15A replaceable in-line fuse for extra overload protection
- Contents: (1) SA831 Battery indicator cable

Cable Length: 24"

Dimensions: 7.48 — 6.69 — 5.32 in

Weight: 0.24 lb

The Projecta COMPAC Series Solar Panels are portable, monocrystalline folding solar panels armed with a versatile 3-in-1 charging cable to provide constant, on-the-go power solutions for phones, action cameras, drones and tablets. The COMPAC Folding Solar Power Banks are ideal for the outdoor adventurer, with carabiners offering secure mounting that will allow the user to charge their panel throughout the day whilst still hiking, fishing, riding and off roading. The Projecta COMPAC Solar Power Banks take between 6-8 hours to charge fully allowing you to store your power during the day whilst off the grid.

The PP10 is ideal for charging your phones, smart watches and action cameras on-the-go boasting Lightning, micro USB and USB-C connectivity in the 3-in-1 charging cable.

Features of the 10W:

• Compact solar charging
• Durable and resistant to damage from heat
• Secure mounting
• Short circuit & surge protection
• Versatile power supply (3.0A USB, Lightning & USB-C ports)
• Folding Design

Specifications

PART NO: PP10

ACCESSORIES: 3 in 1 Charge cable included

OUTPUT: 1.6A (5V)

INPUT: 10W Monocrystalline Solar Cells

BATTERY: N/A

SIZE: Folded: 270x170x10mm / Open: 465x265x3mm

WEIGHT: 300grams total weight

The PP15 can comfortably charge phones, smart watches and action cameras, as well as larger off-the-grid toys like drones and even the Projecta COMPAC Series Power Banks back. The Type C: 5V 3.0A reduces average charge times by up to 30%.

Features of the 15W:

• Compact solar charging
• Durable and resistant to damage from heat
• Secure mounting
• Short circuit & surge protection
• Power bank provides a versatile power supply (3.0A USB, Lightning & USB-C ports)
• Folding Design

Specifications

PART NO: PP15

ACCESSORIES: 3 in 1 Charge cable included

OUTPUT: 2 x 3.0A (USB) / USB-C (PD): 3.0A (5V) max

INPUT: Micro USB / 15W Monocrystalline Solar Cells

BATTERY: 6000 mAh lithium-ion battery (22W at 3.7V)

SIZE: Folded: 270x160x20mm / Open: 630x270x10mm

WEIGHT: 505grams total weight

SPST, silver contacts, push on terminals Amperage rating 20A at 12V, 10A at 24V Mounting opening 12.5mm dia.

The all new range of Navigata L.E.D light bars feature advanced “Optic Drive‚' technology, which captures and focuses more of the light generated to produce an extra penetrating light output, eliminating waste and resulting in a 30% brighter output compared to a conventional L.E.D light bar ofthe same length.

Features:

• One piece die-cast aluminium housing designed without end caps provides optimum sealing andheat dissipation
• Virtually unbreakable hard coated polycarbonate lens
• Stainless steel brackets & mounting hardware (SUS316)
• Fully sealed and submersible (IP68 & IP69K approved)
• Integrated genuine Nitto Breather Vent
• Pre-wired weatherproof DT connector

Technical Information

Amperage rating 30A

Fuse not included

Waterproof Cap

Heavy-Duty Accessory Socket

Reliable performance and safe usage for charging or powering accessories and devices on the go.

With a flush mount factory finish and durable dust proof cover offering quality powering capabilities, this HDRV socket is suitable for any exterior or interior application.

Features:

• Suitable for interior ro exterior fitment
• Features dust proof cover and stylish surface mount plastic housing
• Flush mount for factory finish
• Can be installed with or without the mounting panel

Technical Information

Blister per pair (male/female). Waterproof Connector with Terminals, Wedge and Seals. Amperage Rating: 13A

Cable joiner flared vinyl, fully insulated (butt splice).

LED efficiency and durability. 360º white screw on lens.

Light weight aluminium pole.

121325 and 121330 have plastic folding bases.

121327 is a push in removable type, with an all plastic base.

Ideal for a range of uses from canopies and tailgates to tents and sheds, our best-selling 48cm camping light bar is comprised of high-quality materials and throws a strong 180 degree beam of light. Our 48cm LED light bar is the best selling and most versatile size in our range. It is perfect for a range of camping, automotive and building applications, including tent or awning lighting, illuminating toolboxes, canopies or tailgates, or providing supplementary lighting for workshops or sheds. This kit also includes accessories for pole mounting, switching and and powering the light.

OFTEN IMITATED, BUT NEVER DUPLICATED.

The LED camp lights that Hard Korr Lighting invented are now seen across thousands of New Zealand campsites. In the years since we introduced them to the market, we?ve developed and released many innovations and improvements designed to make our light bars even more useful and hard-wearing, including reinforced grommet ends, inbuilt magnets, removable pole clips and more. We've now taken the next leap forward in design and technology, making lighting your campsite, vehicle or building even easier. Our exclusive diffusers, now included with all light bars, create a much wider, more pleasant light beam - no more LEDs shining in your eyes if you're on the wrong angle! The light bar pole clips and dimmer pole clips (sold separately) make attachment to non-magnetic tent poles much easier. Additionally, flush mounting in canopies or tailgates is now easier and looks better thanks to our wire-covering end caps and flush mount clips (sold separately).

KEY FEATURES:

• Inbuilt magnets in rear channel to assist with mounting
• Reinforced grommets to prevent wire breakage
• Minimal heat output, unlike gas lamps
• Low power consumption - can be left on all night without affecting your battery
• IP68 rating means the lights are completely waterproof (in fact they will run underwater)
• Heavy-duty, double insulated cables to prevent voltage drop, which results in brighter bars
• All cables come standard with waterproof locking DC connectors

Specifications:

• Current draw - 12v/0.5A per hour
• Output - 590 lumens
• Ingress Protection - IP68 (excl. dimmer)
• Beam Angle - 180 degrees
• LED Lifespan - 50,000 hours

Pack Contents - 1xHigh-powered 48cm super bright orange/white light bar, 1xClip-in diffuser, 2xEnd caps, 2xRemovable pole clips (attach to non-magnetic poles), 1x3m extension lead with cigarette/merit adaptor, 1x12v switch.

• Suitable for HRC-8 windlass
• 70 Amp
• Suitable for 12V or 24V DC systems
• Waterproof
• Used for protection of the main conductor circuit for DC winches and the control circuit for hydraulic winches
• Enables the battery, or electrical supply, to be isolated when winch is not in use

Features:

The Rule float switch is the switch of choice for boaters the world over for automatic on-off bilge pump control. The latest designs include a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade “blocked” wire.

Features:

• 37A
• Max Current @ 12VDC: 20A
• Voltage: 12/24/32 VDC
• Wire Size: 14 gauge(1.63mm)
• Wire Length: 28" (712mm)
• Guard: No

They are completely sealed and weighing a mere 250 grams (including cable), Sea Hawk LED lamps are a brand new class of energy saving, compact, lightweight, and ultra durable luminaires that can be installed almost anywhere onboard, interior or exterior.

Manufactured in New Zealand from advanced marine grade materials, Sea Hawk lamps utilise a high performance GrilamidPolyamide lens for superior strength and resistance to impact and UV.

The housing is a tough, proven, high impact plastic offering outstanding UV resistance. The mounting bracket is highly polished 316 marine grade stainless steel. 2.5m of tinned ‘twin core’ marine cable is sealed and pre-wired into each lamp for absolute water tightness and reliable electrical connections.

This self parking Light Duty wiper is suitable for either bulkhead or through glass mounting. The 215BD is a pendulum or single spindle unit. It can easily be converted to a pantograph system with the external pantograph plate that comes with the pantograph wiper arm. The wiper motor unit is fully enclosed in a waterproof housing. The housing is rated at IP66, so the 215BD is suitable for both open and covered boats.

Features:

- 15Nm motor
- Dual Speed
- Self Park
- 40-110 Adjustable Sweep Angle 

Features:

• 10 Watt Work Light with Power bank function
• Magnetic base – 360 degree rotatable base
• LED Charging indicator & battery indicator  
• Li-ion 3.7v 4400mAh Powerbank ideal for charging mobile and tablets  
• USB rechargeable – Micro USB cable included
• Charge time: 4 hours
• Modes: High – Up to  1000 lumens  Low – Up to 140 lumens
• Run time: High – Up to 3 hours  Low – Up to 6 hours 

Features
• 60° Beam Angle – A wide-angled, focused beam lights up a large area of the water
• Compact and simple design – Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light
• Simple to install – Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 4 screws in place. No bonding required
• Easy to clean – Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it
• Fish-Strobe Mode – Exceptionally bright, randomised strobing of the light is proven to attract more fish and catch more bait
• Active Thermal Control – ATC prevents overheating. In the event of overheating the ATC system will reduce the LED power level in order to protect the LEDs, or in extreme cases, turn o the fixture completely.
• Colours Control – Colours models are compatible with OceanDMX for full control, interactivity and colour customisation. Alternatively, cycle smoothly between red, green, blue and white with a standard DC switch

Clean contoured shape to blend with the boats aesthetics. No edges to catch on ropes or crew. Led reliability, energy efficiency and low heat generation. Clear lens for maximum illumination. The red and green colour is created by the LED.

Feature

• High quality, UV stabilised plastic housing
• 12 volt, sold as a pair.
• Dimensions:Base: 93x56mm Depth: 37mm Mount screws: 4mm c/s

The Contour Distribution Stud allows termination of heavy duty cables for one or more connections. Removable side plates allow for connections from all sides. Designed to match all other Contour power distribution products with modular sizing and lock mouldings to facilitate easy grouping. Meets ABYC standards for exposed terminals. A secondary buss may be fitted to the distribution stud to provide connections for smaller wires without cluttering the main stud (refer 113562 below).

The 701 Contour Battery Master Switch is a simple on/off switch which offers a number of unique Features. The contour lock system allows it to be a stand alone unit or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the on or off position, however can be removed by switching to an anti-theft position. Interchangeable labelling system on the control knob allows a full range of applications. Switches come standard with the battery symbol label. Alternative label sets 113691 are available. Removable rear cover insulates the rear terminals against any short circuits and ensures the switch meets ABYC requirements. Removable side plates on 4 sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Screw holes 5mm roundhead. Ignition protected. Non-corrosive construction.

Specifications
• Continuous rating 275 amps DC
• Intermittent rating 455 amps DC
• Cranking rating 1250 amps DC for 10 seconds
• Voltage rating 48 volts DC maximum
• Terminal stud size 2 x 10mm
• Moulded in high temperature, fibre-reinforced plastics