Anchoring

Features

• Tough PVC Rip-Stop fabric.
• 50mm reinforced webbing opening.
• Reinforced construction - nylon straps.
• Continuous webbing for added strength.
• Slows boat rate of drift.
• Ideal for fishing.

Sizes

CODE   WIDTH    LENGTH  FIT BOAT SIZE
10071   500mm     500mm      15ft
10072    650mm    750mm      20ft
10073   1250mm   1250mm    25ft
10074   1350mm   1400mm    30ft

Ideal for towing rated at 2500kg, the Nu-D Stainless Steel D-Shackle provides an easy way of fastening chains and straps securely. This narrow shackle is shaped like the letter D, with threaded pin closure. The small loop can take high loads primarily in line. It's made from marine grade 316 stainless steel with captive pin.

Features - 

• Easier to tighten and loosen without tools
• Easier to see
• Use to connect rope or chain
• Maximum Towing Mass: 2500kg
• 10mm
• Not recommended as an anchor shackle or any use where the pin could be accidentally tripped.
• Rated for towing not lifting

The Maxwell Anchormax is one of our biggest selling winches. It is extremely versatile and has a extremely high power to weight ratio.
The compact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motor.

Intrusion below decks is minimised making the design ideal for boats from 5m (16ft) to 10m (32ft). Fitting to the boat is simplicity itself as no dismantling of the winch is required.
The Anchormax gear housings are marine-grade alloy and the drum is stainless steel. It is supplied as a single direction (clockwise) unit, complete with deck switch, fastenings, template and fitting instructions.

An extremely versatile vertical capstan or general purpose electric winch for use as an anchor winch, pot hauler or davit winch.

FEATURES:

• The ANCHORMAX™ has an extremely high power to weight ratio.

• The compact, fully sealed gearbox is driven by a vertically mounted,

• permanent magnet motor. Intrusion below decks is minimised making the

• design ideal for boats from 5m (16ft) to 10m (32ft). Fitting to the boat is simplicity itself as no dismantling of the winch is required.

• The ANCHORMAX™ gear housings are marine-grade alloy and the

• drum is stainless steel. It is supplied as a single direction (clockwise) unit, complete with deck switch, fastenings, template and fitting instructions.

• The ANCHORMAX is not recommended for use to haul halyards.

• The ANCHORMAX is not recommended for use to haul chain.

SPECIFICATIONS:

Remember for fitting enquiries please see our workshop section on our home page.

Click and Collect Only

INFORMATION

The Kewene Anchor has been a favourite among fishermen since 1974. It is a good anchor for smaller boats with good all around performance.

Galvanised. Popular smaller boat and secondary anchor. Generally good setting and holding. Sliding shank device which increases the chance of getting it back if stuck in rocks. Recommended for boats to 3m.

The featured 'sliding Shank' makes the chances of retrieval a lot higher should it get stuck. Comes with Trip-Release Shackle

1A - 2kg recommended for boats to 4 metres.

1B - 3kg recommended for boats to 5 metres.

2 - 3.75kg recommended for boats to 6 metres.

2A - 5.3kg recommended for boats to 7 metres.

3 - 8.5kg recommended for boats to 9 metres.

4 - 12kg recommended for boats to 10 metres.

The recommendation is only a guide, if you are not sure talk to one of our staff.

Attractive, removable LED pole light that easy adjusts to a suitable height to ensure visibility at night.

8mm Shackle:

Rated to 1500kg

Rated for Towing (Not Lifting Purposes) 

• Material grade for Shackle body is C1045 and the pin is ISO: 41CR4
• High quality carbon and alloy steel, Drop forged and heat treated
• Galvanised and powder coated

10mm Shackle:

Rated for 2500kg

Rated for Towing(Not for Lifting Purposes)

• Material grade for shackle body is C1045 and the pin is ISO: 41CR4
• High quality carbon and alloy steel, drop forged and heat treated
• Galvanised and powder coated

Rated to 500kg

Rated for Towing (Not Lifting Purposes) 

• Material grade for Shackle body is C1045 and the pin is ISO: 41CR4
• High quality carbon and alloy steel, Drop forged and heat treated
• Galvanised and powder coated

Features:

• Made of heavy-duty galvanised steel
• Improved corrosion resistance
• Self-righting

Please Note this is click and collect ONLY!

Quality at an affordable price. The NEW Maxwell …MAX SET galvanised anchor range, based on the proven “Plough' design is available in seven different sizes to suit boats from approximately 4m (15') to 17m (55'). As used by FC boats for many of their boats.

Nylon Rope Pack. Thimble Spliced on one end, 3 Strand

Made from tough, heavy-duty, hardwearing materials, our Ocean Angler Handbrakes are currently considered the most effective specialist fishing drogues on the market. Includes anchor damper. 

Features:

Strong, long-lasting parachute cords attach the chute; a small float stops the chute spinning; a thick, soft rope is provided for attaching to the boat and to collapse the chute for effortless retrieval; and it all packs down into a compact, durable bag.

Sizes: 5ft for 4.5-6m boats, 7ft for 6-9m boats and 12ft for 9-12m boats

Associated products: Nearly all our lure-fishing gear, as the Handbrake will slow the boat down when the wind springs up so you can start catching fish again!

On-the-water tips:

It's recommended that small boat owners attach the Handbrake to the bow, so the vessel faces into the swell, avoiding waves potentially coming over the side or stern. The chute collapse cord can be attached further back on the boat within easy reach, but must not be under any tension or the chute will not fully inflate. The Handbrake can be connected to larger boats further back along the cockpit side or from a stern corner, conditions permitting. In all cases follow the instructions regarding the Anchor Damper included; it’s built to absorb sudden pressure, but incorrect rigging can lead to breakage.

All Savwinch Drum Winches feature a sealed motor and gearbox with a 316 grade stainless steel drum and body to protect from water ingress and corrosion and come complete with double braid rope, chain and switchgear for hassle free anchoring.

Features
• Motor is fully sealed from corrosion/water. No exposed terminals
• Custom rope kits available to suit any anchoring depth
• Australian designed
• Motor & gearbox can be adjusted in up to 12 positions to drum
• Retailed packaged

The Guide Roller is used to assist the lay of the rope/chain on the drum and avoid damage from chafe.

Designed specifically for hassle free use whilst anchoring in a variety of bottom types, especially were there is heightened risk of snagging regular anchors. Delta style design allows for a strong hold, while the slider allows for easy retrieval if the anchor becomes snagged.

These telescopic boat hooks offer great reach when and collapse easily when stored

• Bright-dipped 30mm alloy shaft
• Rubber handgrips
• Easy to fit in a kit bag
• High strength polypropylene hook
• Features a blunt head

Our fixed boat hooks are made from durable allow and marine-grade polypropylene, and are available in two sizes.

Features

• Bright-dipped 25mm alloy shaft
• Rubber handgrips
• High strength polypropylene hook
• Features a blunt head

1500kg & 2500kg respectively. Please choose size. 

3300lbs

RATED FOR TOWING (Not for Lifting Purposes)

• Material grade for shackle body is C1045 and pin is ISO: 41CR4 (or ASTM:5140)
• High quality carbon and alloy steel, drop forged and heat treated
• Galvanised and powder coated

The all new compact HRC FF are Maxwell™ horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC FF are packed with original and proven features including patentedrode management technology developed by Maxwell.

Maxwell’s Revolutionary New Chainwheel.

Maxwell once again leads the market in innovative thinking with the introduction of their latest Wave Design™ chainwheel. This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.

As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope compared to all other products on the market. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.

Wave Design™ Chainwheel

Is fitted to all HRC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and Metric.

Features - 

• Simple bolt down installation ensures effortless and rapid on-deck installation and set up.
• Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design.
• Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation.
• Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass Free Fall lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the free fall device automatically disengages allowing you to power up your anchor.
• Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance.
• Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection.
• High efficiency spur gearbox incorporating a robust non-backwind mechanism.
• High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch.
• Emergency free fall function in the event of onboard power failure. Activated by the supplied, emergency Free Fall lever.
• Revolutionary new chainwheel.
• Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation.

Specifications - 

• Model - HRC FF-6
• Maximum Pull - 410kg/900lbs
• Static Hold - 700kg/1540lbs
• Chain Short Link - 6mm
• Rope Size (Nylon)* (3 strand or 8 plait)** - 12mm 1/2"
• Line Speed (Anchor retrieval nominal 30kg) 33m/min - 108ft/min
• Power Supply (DC) - 12V
• Motor Power - 600W
• Net Weight (Electric) 11.5kg/25lbs

The all new compact HRC FF are Maxwell™ horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC FF are packed with original and proven features including patentedrode management technology developed by Maxwell.

Maxwell’s Revolutionary New Chainwheel.

Maxwell once again leads the market in innovative thinking with the introduction of their latest Wave Design™ chainwheel. This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.

As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope compared to all other products on the market. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.

Wave Design™ Chainwheel

Is fitted to all HRC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and Metric.

Features - 

• Simple bolt down installation ensures effortless and rapid on-deck installation and set up.
• Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design.
• Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation.
• Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass Free Fall lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the free fall device automatically disengages allowing you to power up your anchor.
• Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance.
• Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection.
• High efficiency spur gearbox incorporating a robust non-backwind mechanism.
• High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch.
• Emergency free fall function in the event of onboard power failure. Activated by the supplied, emergency Free Fall lever.
• Revolutionary new chainwheel.
• Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation.

Specifications - 

• Model - HRC FF-7
• Maximum Pull - 410kg/900lbs
• Static Hold - 700kg/1540lbs
• Chain Short Link - 7mm 1/4"
• Rope Size (Nylon)* (3 strand or 8 plait)** - 12mm 1/2"
• Line Speed (Anchor retrieval nominal 30kg) 33m/min - 108ft/min
• Power Supply (DC) - 12V or 24V
• Motor Power - 600W
• Net Weight (Electric) 11.5kg/25lbs

Once again Maxwell leads the way in revolutionary automatic rope/chain windlass technology.

Following on the overwhelming acceptance of the RC10 and over a decade of global success with the Freedom, Liberty and HRC Series automatic rope/chain windlasses, the all new Maxwell RC6 and RC8 windlasses are poised to conquer the market segment demanding a superbly engineered and beautifully designed windlass capable of handling either 6mm/7mm chain/12mm rope or 8mm chain/14mm (9/16") rope combinations.

Features:

Effortless automatic retrieval and deployment of either 8mm chain and up to 14mm rope combination rodes with the RC8 and 6mm chain/12mm rope combinations with the RC6, giving unsurpassed user flexibility.

An innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance.

The RC8 allows simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass.

The RC6 consists of an in-line, vertical gearbox and motor allowing quick and easy installation by either the boat builder or the DIY aftermarket customer.

Manufactured from marine grade 316 stainless steel for long term durability and outstanding aesthetics. The topworks can be fully disassembled utilising the handle provided, a screw diver and common Allen key, making regular service and maintenance a breeze. No special tools required!

A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.

Not only do the RC6 and RC8 effortlessly handle combination rope/chain rodes, they work just as well with all chain rodes for those who may want the extra security of an all chain system combined with an elegantly styled, low profile windlass on their foredeck.

While the RC8 is available with an optional capstan drum, the RC6 is available only as an inexpensive, low profile version, designed with the smaller trailer boat market in mind.

Exclusive Maxwell 3 YEAR Limited Warranty giving you the confidence that you are getting the best product on the market.

Bungee cord docking line that absorbs shock to boats, cleats, and docks.

Bungee mooring lines are your collection of great boating accessories!

10mm 50' long, easy to handle, abrasive resistant & Floats.