Hull Deck & Cabin Hardwear

The RodRak is an expandable fishing rod storage system for hanging your rods from any vertical or horizontal surface.

This rod rack will hold two fishing rods on the shed or garage walls, under the cabin roof, inside the gunnel or any other place you can screw into.

The hooks can be installed standalone, or joined together, if needed you can add a 4mm bungee cord (not supplied) as a retention band.

Features:

• Soft flexible inserts protect handle and tip, & allow fast & easy stow/removal
• Rack holds rod handle size from 25mm – 38mm (1 – 1.5in) diameter
• Stackable for multiple rods
• Vertical or horizontal surfaces
• Made from UV Stabilised, fibreglass reinforced engineering polymers & stainless screws
• Fits all rod lengths

Suits Ski Boats, Runabouts, Half Cabins & Open Boats. Features easy to assemble snap-lock framing.

Features

• Storage boot and support poles included
• Heavy duty polyester, precision cut double-stitched canvas
• Rigid Snap-Lock framing system
• Bright dipped 25mm aluminium tube
• Heavy duty polyester webbing straps
• 316 grade stainless steel fasteners
• Quick and easy assembly
• Rated to 45knots, be aware of winds speeds
• Fold and store in storage boot when trailering

Ideal for towing rated at 2500kg, the Nu-D Stainless Steel D-Shackle provides an easy way of fastening chains and straps securely. This narrow shackle is shaped like the letter D, with threaded pin closure. The small loop can take high loads primarily in line. It's made from marine grade 316 stainless steel with captive pin.

Features - 

• Easier to tighten and loosen without tools
• Easier to see
• Use to connect rope or chain
• Maximum Towing Mass: 2500kg
• 10mm
• Not recommended as an anchor shackle or any use where the pin could be accidentally tripped.
• Rated for towing not lifting

2500kg

5500lb

RATED FOR TOWING (Not for Lifting Purposes)

• Material grade for shackle body is C1045 and pin is ISO: 41CR4 (or ASTM:5140)
• High quality carbon and alloy steel, drop forged and heat treated
• Galvanised and powder coated

Exalto LD wiper arms are designed for the 215BD series windscreen motor and are made of stainless steel with a black coating to avoid a blinding glare. 

Pendulum single arm is available with an adjustable clip, that allows you to park the blade along the edge of the window.

Constructed from high quality, impact resistant ASA plastic; a premium quality material specifically adapted to UV-ray exposed products.
Strong enough to be walked over.

Constructed from high quality, impact resistant ASA plastic; a premium quality material specifically adapted to UV-ray exposed products.
Strong enough to be walked over.

Features:

• Small to Medium Grey Hatch
• External Dimensions: 440mm x 315mm
• Top Line 180° Opening

Exalto LD wiper arms are designed for the 215BD series windscreen motor and are made of stainless steel with a black coating to avoid a blinding glare. 

Pendulum single arm is available with an adjustable clip, that allows you to park the blade along the edge of the window. 

Pantograph parallel arms are available with 1 and 2 springs to increase blade pressure on high speed vessels or raked windows.

The base has a spring loaded, quick release pin for easy pole removal. 51mm diameter x 1.2 metres long. Polished stainless steel. Pole has a 1.5mm wall thickness and should be used for a single skier.

Complete kit. 1.2 metre (standard) pole, U bracket top support and base. Threaded collars on U bolt prevent it from clamping hard up on pole, thus allowing fast pole removal. The top mounting bracket or plate must be located no lower than 48cm from the top of the pole.

Heavy Duty Water Ski Pole With U BracketDetachable water ski pole exclusive to TENOB. The base has a spring loaded quick release pin for easy pole removal. 51mm diameter x 1.2 metres long. Polished stainless steel. Pole has a 2mm wall thickness and should be used for twin skiers, sea biscuits & wake boards (beginner level).

Complete kit. 1.2 metre (heavy duty) pole, U bracket top support and base. Threaded collars on U bolt prevent it from clamping hard up on pole, thus allowing fast pole removal. The top mounting bracket or plate must be located no lower than 48cm from the top of the pole.

Flip top cap that cannot be lost overboard. Integral tank vent with flame arrestor. U.V. stabilised injection moulded plastic with ‘gas’ identification. 110 x 73mm base.

Use our SeaDek template kits to create your own template(s) to submit to us for a quote and to begin production of your pads.

SeaDek non-skid, closed cell EVA products offer safe and comfortable alternatives to molded in non-skid, paint-on textures and other marine traction products currently available.

Formulated with a 3M acrylic based high-bond pressure sensitive adhesive, SeaDek's robust, peel-and-stick application makes it easy to install and requires no mounting of hardware. Easy to clean and stain resistant, SeaDek also provides protection for boat surfaces, especially in high traffic areas. Other benefits that SeaDek offers include:

Features:

• Exceptional traction even when wet
• Unparalleled comfort when standing, walking or leaning on boat surfaces
• Shock absorption, which decreases fatigue
• Protection for boat surfaces against scratches, chips and dents
• Noise reduction characteristics – ideal for fishermen

Secure support for trolling motor shafts while travelling either on the water or on the trailer 

The fixed extender gives you the correct height off the deck and the G-Hold gives tight retention for the trolling motor shaft. Total height off deck 160mm (6.3 in)

The support can be removed from the StarPort when not used, clearing the deck for fishing. 

An Adjustable Extender R-Lock can also be used where the motor shaft is offset from the mount. If you simply need more length then adding a SwivelPort as an extension can also do the job.

The SwivelPort is designed to allow accessories to be easily rotated 360°.

Factory set friction joint. Can be attached to any StarPort, SidePort, RIBPort or RailMount and will receive any RAILBLAZA accessory.

The TracPort Dash 350 turns one StarPort into three. Supplied with the StarPort Bridge Support for added rigidity, it will lock into place on your StarPort firmly, and increase your work space. StarPorts can be loosened and slid along the track to the correct position.Once it's set up, simply clip your RAILBLAZA accessories in and out, then remove the system when you're finished for security, transport or storage!Supplied with 2 StarPort adaptors, in case you want to use 2 StarPorts (sold separately) for a super rigid installation.

What you get:

350mm aluminium extrusion,
2 x endcaps
3 x Starport/TracNut Combos
2 x StarPort Adaptors
1 StarPort Bridge Support
All fastenings

The RAILBLAZA StarPort is a unique and versatile multifunctional mount, which is used in a huge number of applications and allows users to fit and swap out our full range of RAILBLAZA accessories.Made from high grade engineering plastics, the StarPort is easy to fit and stylish. It can be surface or recess mounted on power boats, inflatables, sail boats, kayaks, ATVs, garages and many other applications.

Many vessels are made to suit the mount base pattern of Scotty, RAM, Cannon, Fish-On, and many others.Now RAILBLAZA's original accessories can easily be fitted to these vessels.After many, many requests we introduced a StarPort to fit straight into this space, the StarPort HD. This is a stylish, four screw base mount, which comes with the popular RAILBLAZA locking slide, and is lower in profile than others on the market.IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).

Now, your StarPort mounting system can stand tall. The StarPort extender plugs into any StarPort, and has the same star shape on top with a clever little lock. The Fixed Extender gives you 125 mm (5 in) of clearance from the StarPort - perfect for raising RAILBLAZA's Fillet Table - also an optimum distance for tight space requirements on kayaks or similar-sized craft. When coupled with one of RAILBLAZA's large range of accessories, the Extender is a great addition to help keep hold of your emergency torch or fishfinder, or any number of useful items.

SpecsLength: 150mm (6")overall, 125mm (5") of extension

The RAILBLAZA StarPort is a unique and versatile multifunctional mount, which is used in a huge number of applications and allows users to fit and swap out our full range of RAILBLAZA accessories.Made from high grade engineering plastics, the StarPort is easy to fit and stylish. It can be surface or recess mounted on power boats, inflatables, sail boats, kayaks, ATVs, garages and many other applications.

The RAILBLAZA G-Hold range holds varying sizes of poles, tools and bundles, like fishing rods, shovels, boathooks, grubbers, electric fence standards, oars, paddles, spearguns, you get the idea.

Features:

• They install in any RAILBLAZA StarPort.
• The flexible quick-release strap has two securing points for minimum and maximum diameters, providing strong retention.

The RAILBLAZA StarPort is a unique and versatile multifunctional mount, if you need this versatility from a vertical surface, but require a horizontal socket, SidePort is the mount for you. Ideally suited for gunwales of smaller tinnies, vertical cockpit wells on kayaks and any other application where you have a vertical surface, but need a horizontal StarPort.Fitted in only minutes, and sold with all necessary stainless steel fasteners the SidePort is a fantastic mount and great value for money.

IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).

For more information, and mounting tips, view our installation video on this page.

Mounting Instructions:

• Drill holes in surface you are mounting your SidePort to.
• Position SidePort into place
• Tighten nuts or screw heads to a firm tension.
  * Ensure you have adequate clearance behind the surface for screw and/or bolt penetration, and that no cabling, plumbing or rigging will be adversely affected.

The RodStow rod holder system is a vertical fishing rod storage system for boats. RodStow rod racks will hold your rods above deck, safely and securely, ready for your fishing experience. 

It features a removable gimbal pin that you can leave in to support the rod and stop rotation, or remove to let the rod pass through. The vertical RodStow rod rack is suitable for most rods and reels, including spinning, trigger, boat and game reels, and any length of fishing rod.

Features:

• Tube size 40mm (1.57in) inside diameter
• Can holds gaffs, boat hooks or nets
• Removable gimbal pin to stop rod rotation
• Made from UV Stabilised, fibreglass reinforced engineering polymers
• Fits all rod lengths
• Stainless steel screws