Boating Accessories

Features

• A durable cover available in 3 sizes.
• Fits a variety of Jet ski styles.
• 100% Dope dyed polyester fabric.
• Water-resistant and breathable.
• An excellent choice for year-round storage or an economical trailerable cover.
• Shock cord for ease of use and webbing straps to tie it down for trailering

If the size you need is unavailable we can order it in.

The trusted Thetford power in a bag! Convenient water soluble sachets for the waste-holding tank.

Thetford proudly presents new water-soluble sachets for your waste-holding tank; powerful and easy! These new sachets break down the waste in the tank, eliminate nasty smells and reduce gas build up. They are not only easy to use, because they always provide the right dose, but the sachets also come in new smart packaging, which makes them easy to store and use. This way Thetford makes your holiday even more enjoyable.

• The right dose every time
• Outstanding odour control
• Liquefies waste for easier tank emptying
• Reduces gas build-up
• Available in bags of 12 sachets
• 1 dose lasts up to 5 days

Marine Washcoat and Shine 2.0Litre is a powerful wash that removes salt buildup and fortifies your acrylionic protective coating while increasing the shine.

Protects and delays the speed of damage caused by UV.

Directions Using our Salt-attack mixer fill cup and wash down with Salt-attack washcoat then a light rinse off , The protective coating will cure in approx two hours if using a bucket add 125-150 mls per 4-6 lire water in bucket

NEVER WAX AGAIN!

SPST, silver contacts, push on terminals Amperage rating 20A at 12V, 10A at 24V Mounting opening 12.5mm dia.

Amperage rating 30A

Fuse not included

Waterproof Cap

The RodRak is an expandable fishing rod storage system for hanging your rods from any vertical or horizontal surface.

This rod rack will hold two fishing rods on the shed or garage walls, under the cabin roof, inside the gunnel or any other place you can screw into.

The hooks can be installed standalone, or joined together, if needed you can add a 4mm bungee cord (not supplied) as a retention band.

Features:

• Soft flexible inserts protect handle and tip, & allow fast & easy stow/removal
• Rack holds rod handle size from 25mm – 38mm (1 – 1.5in) diameter
• Stackable for multiple rods
• Vertical or horizontal surfaces
• Made from UV Stabilised, fibreglass reinforced engineering polymers & stainless screws
• Fits all rod lengths

The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position.

• Rotating collar helps reduce ‘strike-theft’
• Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through
• Fully adjustable 360° around, over 90° vertical
• Easy access to reel when in position
• Square-tooth adjustable tilt stops rotational slipping.

For spinning reels, bait casting reels, boat reels, fly reels. Allows you to fit your Rod Holder to any StarPort, SidePort, RailMount or RIBPort.

When finished fishing for the day, remove from StarPort and stow in dry place, do not store wet.

What You Get

1 x Rod Holder II
1 x StarPort
1 x surface mount collar
1 x weather-tight gasket & cover
2 x 12-gauge 32 mm self-tapping screws
2 x M6 x 35mm machine screws, washers & nuts

The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position.

• Rotating collar helps reduce ‘strike-theft’
• Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through
• Fully adjustable 360° around, over 90° vertical
• Easy access to reel when in position
• Square-tooth adjustable tilt stops rotational slipping.

For spinning reels, bait casting reels, boat reels, fly reels. Allows you to fit your Rod Holder to any StarPort, SidePort, RailMount or RIBPort.

When finished fishing for the day, remove from StarPort and stow in dry place, do not store wet.

*Does not include StarPort

RAILBLAZA RailMounts are simple-to-use mounts, allowing the easy attachment of RAILBLAZA accessories.Simply screw the RailMount together onto your rail, no need to drill holes so you can easily move the RailMount to a different spot, and your rail is as good as new!The RailMount 32-41 is specifically designed for both circular AND square 32 mm (1.25 in) rails, 41mm (1 5/8?) round rails such as those found on Hobie kayak outriggers, and the multi-sided Hobie H-Rails.All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws. These RailMounts have been designed with the Aka rails and H-Rails on Hobie kayaks in mind, finally giving Hobie enthusiasts an off-the-shelf solution to mount a whole range of accessories to their rails.

What you get

1 x RailMount 32-41 mouldings (2 pieces)
1 x StarPort
1 x weather-tight gasket & cover
2 x non-slip rubber inserts
2 x Hobie H-Rail rubber inserts
4 x spacers
2 x M6 x 65mm machine screws & molybond coated nuts

RAILBLAZA RailMounts are simple-to-use mounts, allowing the easy attachment of RAILBLAZA accessories, and many other things, to your rails. The RailMount 19-25 can be mounted onto any 19-25mm(.75-1'') rail in minutes, they come either as a pair of RailMounts or packaged as a single RailMount & StarPort combo. All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws.

What you get

1 x RailMount 19-25 (top and bottom)
1 x rail diameter adapter (Adapt down from 25mm to 19mm)
1 x non-slip rubber insert
1 x self adhesive grip tape
1 x StarPort
1 x weather-tight gasket & cover
2 x M6x x 50mm screws & molybond coated nuts

The RAILBLAZA QuikPort is a durable and weatherproof stick-on mount which will securely stick to your Stand Up Paddleboard (SUP), Inflatable Boat (RIB), kayak and many other vessels. The QuikPort is the perfect solution for holding your GoPro, action camera, navigation lights, phone, gas bottle or drink holder without the need to drill any holes. 

Easily attach the RAILBLAZA QuikPort on virtually any surface and location you desire by using the supplied 3M VHB self-adhesive pad, or alternatively it can be glued if that’s your preference. The QuikPort is able to adhere to almost any surface and is proven to stick incredibly well to PVC, Hypalon, Fibreglass, Epoxy and more with the right preparation. 

The QuikPort is designed to fit into much tighter spaces than our similar heavier duty product the RAILBLAZA RIBPort. Both are made in New Zealand from quality engineering plastics, which is ideal for both flat and slightly curved surfaces due to its partially flexible nature.

The QuikPort is ideal for a Inflatable Boat accessory mount or a Paddle Board accessory mount as many vessels such as these aren't suitable for drilling holes, using screws or bolts. The RAILBLAZA Ports are the perfect way to deck out your gear with a huge range of accessories, making them attachable and detachable by simply snapping them into place.

What You Get:
1 x QuikPort (90mm (3.5”) diameter) Including StarPort
1 x 3M VHB
1 x abrasive cleaning pad
1 x isopropyl alcohol cleaning wipe

The NaviPack Portable LED Navigation Light Kit is the perfect companion for small, tiller steered power boats, inflatables, or as an emergency nav light pack for larger vessels. In one convenient, value-for-money pack you get everything you need to comply with the legal requirements in almost every country and territory.

Supplied with three RAILBLAZA mounts, you can use the StarPort, SidePort or QuikPort, and the good news is you’ll have one of them left over. There are endless mounting possibilities.

Disassembly when you’re finished is quick and easy, and in the handy storage bag it will stow just about anywhere.

What You Get

1 x Storage bag
1 x Extenda Pole 1000
1 x i360
1 x iPS
1 x StarPort
1 x SidePort
1 x QuikPort (with 3M VHB adhesive pad)
1 x fastener pack

No wires required
Powered by 3 AA batteries (not included)
Lights meet USCG 2nm standards
Pole disassembles for easy stowage
Easily detached using RAILBLAZA StarPort mounts
Comes with tidy storage bag
All fasteners supplied

Extra safe mounting for your mobile devices.

The RAILBLAZA Mobile Device Holder, or “Mobi” for short, is ready to look after your phone, GPS, VHF, EPIRB or other mobile device.

Our unique design brings a new level of versatility to the device holder market, once you have your Mobi you can attach it to any vessel or vehicle on water or land – basically any place you can install a RAILBLAZA StarPort, RIBPort or RailMount.

The spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power. For extra peace of mind the adjustable, UV stabilised, Eurethane rubber retaining strap ensures your device goes nowhere, even in the most rugged environment.

Black replacement knobs - 2 per pack

With circuit board manufacture, plastic moulding and assembly all done in New Zealand, this is a quality unit, at an affordable price.

To maximise battery life we have used a high quality, Japanese made, Nichia power LED and a high efficiency digital circuit. It is lightweight, and IP67 rated for dust and water ingress, meaning it will float with the lens right up out of the water. AA batteries mean many more light hours for your dollars when compared to AAA, and as it's battery powered theres no need for external wiring and switching.

The i360 is Compatible with any RAILBLAZA StarPort, SidePort, RIBPort or RailMount, so can be mounted just about anywhere.

Features

• Designed and made in New Zealand
• 25 hours to 200 hours battery life
• 3 operation modes;
  Full brightness navigation mode 2NM up to 25hrs battery life
  Low brightness work mode up to 160 hrs battery life
  Flashing emergency Mode over 200hrs battery life
• Waterproof to 1 metre
• Floats with lens clear of water
• Powered by 3 x AA batteries, not supplied
• Meets USCG 2NM 33 CFR 183.810 & ABYC A-16
• Independently tested by Imanna Labs Inc, Florida
• Fits any RAILBLAZA mounting port, ordered separately.

The i360 meets the required standards for an all-round white navigation light for power and sailboats under 12 metres, and kayaks & canoes. It is also perfect as an anchor light.

The E Series USB StarPort combines a USB connector within our StarPort base allowing you to charge your tablets, mobile phones and many other devices. It is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer.

Combine the E Series USB StarPort with the RAILBLAZA Mobi Mobile Device Holder, or ScreenGrabba iPad & Tablet Holder and you can hold your device and charge it.

Features

• StarPort
• Weather-tight gasket & cover
• E Series surface mount collars USB
• 12V to 5V 2.1A DC converter cable
• All required mounts and fasteners

ROHS compliant with CE and RCM certification you can connect this to any power system with confidence.

The E Series USB StarPort is splashproof however we do not recommend mounting in weather exposed areas.

The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water. 

The only thing better than a cold drink on a hot day (or vice versa), is having one within easy reach while on your boat, PWC or kayak any time you want it. The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water. Made in New Zealand from high quality, UV proof plastic. Fit to boats, inflatables, kayaks, bass boat, yachts there’s no limit where these can be used

Features

• Made in New Zealand from high quality, UV proof plastic
• Fit to boats, inflatables, kayaks, fibreglass or even put it in a sheet winch!
• Fits any RAILBLAZA port, easily removed and stowed when not in use
• Holds bottles, coffee mugs & glasses

The Camera Mount Adaptor from RAILBLAZA is the safe and secure option for holding your camera or GoPro on any kayak, canoe, bass boat, yacht and more.

The RAILBLAZA Camera Mount Adaptor is an instantly portable, easy way to mount your device safely and securely anywhere you choose on your kayak, canoe, bass boat, or yacht. If you want to change your shot angle from bow to stern, vertical to horizontal, or simply to detach your camera for some hand held close ups, this is the fast and easy way move and reattach your device without hassle. Simply attach your device, and this camera mount will clip into any RAILBLAZA StarPort, SidePort, RIBPort or RailMount.

The RAILBLAZA Camera Mount Adaptor uses the universally compatible ¼ 20 thread screw which will easily attach your action camera or any device. This RAILBLAZA camera mount accessory also comes with a GoPro style tripod adapter, allowing you to mount your GoPro products or other well known digital camera brands to your kayak or boat with no troubles. 

Due to the versatile nature of all RAILBLAZA accessories, the Camera Mount Adaptor is easily moved, adjusted, transported, removed or stowed in seconds according to your needs. If you need to quickly run into a store for a last minute bait or tackle emergency, it’s a quick and easy action, unclip any RAILBLAZA accessory to keep it - and your attached device - safe in the boot of your car.

When it comes to moving loads over soft sand, wider wheels are not necessarily better. Bulldozers and military tanks use long tracks, reducing the chance of them digging in. SandTrakz puncture free wheels mimic this track system, the outer rim compresses when in use giving a longer track length. On soft sand this reduces how hard you have to pull to move your cart by more than half compared to standard puncture-free Kiwi Wheels*! In fact the SandTrakz system is so effective we think it’s better than balloon wheels! 

• Half the effort*
• Puncture free
• Fits inside hatches

Whilst they are designed to make life easier on soft surfaces, SandTrakz wheels are great on hard surfaces. Because C-TUG SandTrakz are designed to compress they act like suspension on hard surfaces, making for easy transition from soft to hard surfaces.
Patented, C-Tug SandTrakz Wheels are made in New Zealand.

With two rotating R-Lock friction joints and a knuckle joint that tilts in 15° increments, the Adjustable Extender R-Lock adds great versatility. When coupled with one of RAILBLAZA's large range of accessories, it helps keep hold of your Fillet Table, fish finder, or any number of useful items.

When coupled with one of RAILBLAZA’s large range of accessories, the Extender is a great addition to help keep hold of your emergency torch or fishfinder, or any number of useful items.

NOTE: Extenders increase the force applied to a StarPort, they are not designed to have heavy loads applied. Extenders must not be used with a rod holder for trolling.

RAILBLAZA Platforms will fit into RAILBLAZA StarPort, or many sailboat winch handle receivers.

The Platform can be used as a flat surface to make many items StarPort compatible, meaning these items can all be plugged in and locked in place on your inflatable, kayak, sailboat or any other place that will take a StarPort.Once you have finished using the platform it can be removed and the StarPort can be retasked for another application.

Platforms are available in black or white and are sold individually, or as a kit complete with a StarPort.