Marine Accessories

The base has a spring loaded, quick release pin for easy pole removal. 51mm diameter x 1.2 metres long. Polished stainless steel. Pole has a 1.5mm wall thickness and should be used for a single skier.

Complete kit. 1.2 metre (standard) pole, U bracket top support and base. Threaded collars on U bolt prevent it from clamping hard up on pole, thus allowing fast pole removal. The top mounting bracket or plate must be located no lower than 48cm from the top of the pole.

Heavy Duty Water Ski Pole With U BracketDetachable water ski pole exclusive to TENOB. The base has a spring loaded quick release pin for easy pole removal. 51mm diameter x 1.2 metres long. Polished stainless steel. Pole has a 2mm wall thickness and should be used for twin skiers, sea biscuits & wake boards (beginner level).

Complete kit. 1.2 metre (heavy duty) pole, U bracket top support and base. Threaded collars on U bolt prevent it from clamping hard up on pole, thus allowing fast pole removal. The top mounting bracket or plate must be located no lower than 48cm from the top of the pole.

Is a large, portable fuel container on wheels designed for industrial, commercial, and recreational applications. It is a safe, fast, and convenient way to refill lawn tractors, boat engines, generators, snowmobiles, ATVs, etc.

This is ideally suited for farm and rural use as well as cottage and marine applications. Made from high density polyethylene, the fuel container is resistant to corrosion and denting. Its sturdy six-inch wheels and extra-deep handle make it easy to deliver fuel dockside when refueling boats or powered water craft.

Two shut-off valves, at both the tank and hose connector, make it safe and easy to disconnect the Flo n' go pump for refilling and transportation.

The Seahorse flag comes with a 600mm long pole, and fits either the STD or the GPS Seahorse Kontiki.

Features

• Titanium bonded
• Integrated Tungsten Carbide wire cutters
• High-leverage mono and braid compound cutters
• Visible full-tang Aluminium alloy construction
• Non-slip Cuda scale pattern grips
• Ballistic nylon sheath and convenient lanyard
• Size: 7.5in

Manufactured from UV stabilised clear polycarbonate. Suitable for new or existing self draining cockpits/floors. PVC mounting seal and solid polypropylene sealing ball. Must be installed on a near vertical flat face.Outside Dia (mm):113 Overall length (mm):74 Cut Out Dia:44 Mount Screws (mm):5 c/s

Made from EVA foam, pre-shaped and drilled to suit most Mercury®/Johnson®/Evinrude®/Honda®/Suzuki®/Tohatsu® outboard bracket mounts. These pads reduce noise transfer by 15-40% and help reduce electrolysis. Rated to 250HP. Sold as a pair.

The high performance SE Sport foils will provide more speed and precision control on most outboard and stern drive powered boats. Made of flexible, high strength co-polymer, the foils are rugged enough to stop porpoising and side-to-side movement. Specially engineered crescent shaped planing surface funnels water flow to add thrust, cut planing time and provides both slower 'on plane' and higher 'top end' speeds. A special tracking feature, TURBO TRAC, locks in high speed turns without cavitation (prop blowout) for precise control. SE 200 suits motors from 8HP up to 40HP, while the SE 300 suits motors from 40HP to 350HP and are supplied with 6mm x 32mm stainless steel mount bolts, lock nuts and insulators.FeaturesIncreased lift with crescent plane surfaceSmall footprint 75-100mm narrower than most other foilsTURBO TRAC enhances thrust and controlControl tip cuts tight turnsSleek shape compliments today's boat designsOne piece high strength engineering grade co-polymerMounting holes suit other popular one piece foils

Stainless steel spring style hatch and window support. When hatch or window is in an open position the spring coil becomes a rigid support. To close, apply side pressure to the middle of the spring coil and the support will collapse to a closed position.

Manufactured from durable white U.V. resistant ASA plastic and featuring a secure closing mechanism. Diamond pattern non-skid surface provides sure-footedness with under lid reinforcing designed to maximise strength and limit flexing. Can be mounted in either the vertical or horizontal plane, with a weather resistant gasket seal. Twin recessed hinges with heavy duty stainless steel pins open to 90°. Complete with Cut Out template and fastening plugs. Intrusion 19mm.

A combination of varnished wooden shaft, with turned 120mm x 34mm handgrip, coupled with a durable moulded polypropylene blade. The 170mm wide blade has a slightly concave face for improved rowing efficiency. The shafts are turned to 41mm diameter to suit 221070 oar stops, however due to timber’s natural movement with moisture, this diameter can vary up to 1mm. Sold as a pair.

Grey fuel hose. U.V. stabilised primer bulb. Fitted with motor and tank end fittings. 2.1m in length x 8mm ID hose.

Grey fuel hose. U.V. stabilised primer bulb. 2.1m in length x 8mm ID hose.

Grey fuel hose. U.V. stabilised primer bulb. Fitted with motor and tank end fittings. 2.1m in length x 8mm ID hose.

Clear bowl only. 

Replacement cap with gauge to suit 200110 deluxe fuel tank.

These can be fitted to your Ice Station Ice Boxes.

Suits from 20Ltr to 150Ltr

SeaDek non-skid, closed cell EVA products offer safe and comfortable alternatives to molded in non-skid, paint-on textures and other marine traction products currently available.

Formulated with a 3M acrylic based high-bond pressure sensitive adhesive, SeaDek's robust, peel-and-stick application makes it easy to install and requires no mounting of hardware. Easy to clean and stain resistant, SeaDek also provides protection for boat surfaces, especially in high traffic areas. Other benefits that SeaDek offers include:

Features:

• Exceptional traction even when wet
• Unparalleled comfort when standing, walking or leaning on boat surfaces
• Shock absorption, which decreases fatigue
• Protection for boat surfaces against scratches, chips and dents
• Noise reduction characteristics – ideal for fishermen

SeaDek non-skid, closed cell EVA products offer safe and comfortable alternatives to molded in non-skid, paint-on textures and other marine traction products currently available.

Formulated with a 3M acrylic based high-bond pressure sensitive adhesive, SeaDek's robust, peel-and-stick application makes it easy to install and requires no mounting of hardware. Easy to clean and stain resistant, SeaDek also provides protection for boat surfaces, especially in high traffic areas. Other benefits that SeaDek offers include:

Features:

• Exceptional traction even when wet
• Unparalleled comfort when standing, walking or leaning on boat surfaces
• Shock absorption, which decreases fatigue
• Protection for boat surfaces against scratches, chips and dents
• Noise reduction characteristics – ideal for fishermen

SeaDek non-skid, closed cell EVA products offer safe and comfortable alternatives to molded in non-skid, paint-on textures and other marine traction products currently available.

Formulated with a 3M acrylic based high-bond pressure sensitive adhesive, SeaDek's robust, peel-and-stick application makes it easy to install and requires no mounting of hardware. Easy to clean and stain resistant, SeaDek also provides protection for boat surfaces, especially in high traffic areas. Other benefits that SeaDek offers include:

Features:

• Exceptional traction even when wet
• Unparalleled comfort when standing, walking or leaning on boat surfaces
• Shock absorption, which decreases fatigue
• Protection for boat surfaces against scratches, chips and dents
• Noise reduction characteristics – ideal for fishermen

Be safe and be seen on the water with the new RAILBLAZA Visibility Kit II is a must-have safety item in the kit of any kayak angler, or recreational paddler. In one convenient, value-for-money pack you get everything you need for your kayak, canoe or small boat to be seen on the water day and night. Simply mount the StarPort HD with the supplied fastenings, lock in the 1 metre (3') Extenda Pole 1000, clip on the orange fluoro flag for daytime visibility, and lock the Illuminate i360 ‚“ All-round White Navigation Light into the port on top for safety and regulatory compliance at night.

Disassembly when you're finished is quick and easy, and it will store just about anywhere. The i360 light can also be fitted to other RAILBLAZA ports around the kayak, and the Extenda Pole 1000 can be used to display a dive or national flag, or combined with RAILBLAZA camera mounts as a camera pole.

What you get:

1 x 1 Metre, 3 piece Extenda Pole
1 x Orange flouro flag
1 x RAILBLAZA Illuminate i360 All-round White Navigation Light ( 3 x AA batteries not included)
1 x StarPort HD mount
1 x Fastening pack (4 x 5mm x 20mm 304 Stainless machine screws, washers and nylok nuts)
1 x Velcro strap for storage of Extenda Pole

Secure support for trolling motor shafts while travelling either on the water or on the trailer 

The fixed extender gives you the correct height off the deck and the G-Hold gives tight retention for the trolling motor shaft. Total height off deck 160mm (6.3 in)

The support can be removed from the StarPort when not used, clearing the deck for fishing. 

An Adjustable Extender R-Lock can also be used where the motor shaft is offset from the mount. If you simply need more length then adding a SwivelPort as an extension can also do the job.

The SwivelPort is designed to allow accessories to be easily rotated 360°.

Factory set friction joint. Can be attached to any StarPort, SidePort, RIBPort or RailMount and will receive any RAILBLAZA accessory.

The TracPort Dash 350 turns one StarPort into three. Supplied with the StarPort Bridge Support for added rigidity, it will lock into place on your StarPort firmly, and increase your work space. StarPorts can be loosened and slid along the track to the correct position.Once it's set up, simply clip your RAILBLAZA accessories in and out, then remove the system when you're finished for security, transport or storage!Supplied with 2 StarPort adaptors, in case you want to use 2 StarPorts (sold separately) for a super rigid installation.

What you get:

350mm aluminium extrusion,
2 x endcaps
3 x Starport/TracNut Combos
2 x StarPort Adaptors
1 StarPort Bridge Support
All fastenings