Hull Deck & Cabin Hardwear

The RodStow rod holder system is a vertical fishing rod storage rack and caddy for boats. RodStow rod racks will hold your rods above deck, safely and securely, ready for your fishing experience. 

It features a storage caddy for lures, traces and other tackle, it’s even big enough to hold a small tackle box. These rod holders have a removable gimbal pin that you can leave in to support the rod and stop rotation, or remove to let the rod pass through. 

RodStow is a modular system, if you buy more you can add them together to make longer rod racks. 

Offset mounting is possible, giving you a solution for storing larger reels, without them hitting each other. The vertical RodStow rod rack is suitable for most rods and reels, including spinning, trigger, boat and game reels, and any length of fishing rod.

Features:

• Storage caddy for lures, traces and other tackle
• Tube size 40mm (1.57in) inside diameter
• Can holds gaffs, boat hooks or nets
• Removable gimbal pin to stop rod rotation
• Made from UV Stabilised, fibreglass reinforced engineering polymers
• Fits all rod lengths
• Stainless steel screws

The RodRak Pole Holder is an expandable paddle and pole storage system for hanging paddles and landing nets from any vertical or horizontal surface.

Store gaffs, boat hooks, nets or paddles on the shed or garage walls, under the cabin roof, inside the gunnel or any other place you can screw into.

The hooks can be installed standalone, or joined together, if needed you can add a 4mm bungee cord (not supplied) as a retention band.

Features:

• Soft flexible inserts protect pole, & allow fast & easy stow/removal
• Pole size from 25mm – 38mm (1 – 1.5in) diameter
• Holds gaffs, boat hooks, nets or paddles
• Stackable for multiple poles
• Vertical or horizontal surfaces
• Made from UV Stabilised, fibreglass reinforced engineering polymers & stainless screws
• Fits any length

The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position.

• Rotating collar helps reduce ‘strike-theft’
• Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through
• Fully adjustable 360° around, over 90° vertical
• Easy access to reel when in position
• Square-tooth adjustable tilt stops rotational slipping.

For spinning reels, bait casting reels, boat reels, fly reels. Allows you to fit your Rod Holder to any StarPort, SidePort, RailMount or RIBPort.

When finished fishing for the day, remove from StarPort and stow in dry place, do not store wet.

What You Get

1 x Rod Holder II
1 x StarPort
1 x surface mount collar
1 x weather-tight gasket & cover
2 x 12-gauge 32 mm self-tapping screws
2 x M6 x 35mm machine screws, washers & nuts

RAILBLAZA RailMounts are simple-to-use mounts, allowing the easy attachment of RAILBLAZA accessories.Simply screw the RailMount together onto your rail, no need to drill holes so you can easily move the RailMount to a different spot, and your rail is as good as new!The RailMount 32-41 is specifically designed for both circular AND square 32 mm (1.25 in) rails, 41mm (1 5/8?) round rails such as those found on Hobie kayak outriggers, and the multi-sided Hobie H-Rails.All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws. These RailMounts have been designed with the Aka rails and H-Rails on Hobie kayaks in mind, finally giving Hobie enthusiasts an off-the-shelf solution to mount a whole range of accessories to their rails.

What you get

1 x RailMount 32-41 mouldings (2 pieces)
1 x StarPort
1 x weather-tight gasket & cover
2 x non-slip rubber inserts
2 x Hobie H-Rail rubber inserts
4 x spacers
2 x M6 x 65mm machine screws & molybond coated nuts

The RAILBLAZA QuikPort is a durable and weatherproof stick-on mount which will securely stick to your Stand Up Paddleboard (SUP), Inflatable Boat (RIB), kayak and many other vessels. The QuikPort is the perfect solution for holding your GoPro, action camera, navigation lights, phone, gas bottle or drink holder without the need to drill any holes. 

Easily attach the RAILBLAZA QuikPort on virtually any surface and location you desire by using the supplied 3M VHB self-adhesive pad, or alternatively it can be glued if that’s your preference. The QuikPort is able to adhere to almost any surface and is proven to stick incredibly well to PVC, Hypalon, Fibreglass, Epoxy and more with the right preparation. 

The QuikPort is designed to fit into much tighter spaces than our similar heavier duty product the RAILBLAZA RIBPort. Both are made in New Zealand from quality engineering plastics, which is ideal for both flat and slightly curved surfaces due to its partially flexible nature.

The QuikPort is ideal for a Inflatable Boat accessory mount or a Paddle Board accessory mount as many vessels such as these aren't suitable for drilling holes, using screws or bolts. The RAILBLAZA Ports are the perfect way to deck out your gear with a huge range of accessories, making them attachable and detachable by simply snapping them into place.

What You Get:
1 x QuikPort (90mm (3.5”) diameter) Including StarPort
1 x 3M VHB
1 x abrasive cleaning pad
1 x isopropyl alcohol cleaning wipe

The NaviPack Portable LED Navigation Light Kit is the perfect companion for small, tiller steered power boats, inflatables, or as an emergency nav light pack for larger vessels. In one convenient, value-for-money pack you get everything you need to comply with the legal requirements in almost every country and territory.

Supplied with three RAILBLAZA mounts, you can use the StarPort, SidePort or QuikPort, and the good news is you’ll have one of them left over. There are endless mounting possibilities.

Disassembly when you’re finished is quick and easy, and in the handy storage bag it will stow just about anywhere.

What You Get

1 x Storage bag
1 x Extenda Pole 1000
1 x i360
1 x iPS
1 x StarPort
1 x SidePort
1 x QuikPort (with 3M VHB adhesive pad)
1 x fastener pack

No wires required
Powered by 3 AA batteries (not included)
Lights meet USCG 2nm standards
Pole disassembles for easy stowage
Easily detached using RAILBLAZA StarPort mounts
Comes with tidy storage bag
All fasteners supplied

Extra safe mounting for your mobile devices.

The RAILBLAZA Mobile Device Holder, or “Mobi” for short, is ready to look after your phone, GPS, VHF, EPIRB or other mobile device.

Our unique design brings a new level of versatility to the device holder market, once you have your Mobi you can attach it to any vessel or vehicle on water or land – basically any place you can install a RAILBLAZA StarPort, RIBPort or RailMount.

The spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power. For extra peace of mind the adjustable, UV stabilised, Eurethane rubber retaining strap ensures your device goes nowhere, even in the most rugged environment.

Black replacement knobs - 2 per pack

With circuit board manufacture, plastic moulding and assembly all done in New Zealand, this is a quality unit, at an affordable price.

To maximise battery life we have used a high quality, Japanese made, Nichia power LED and a high efficiency digital circuit. It is lightweight, and IP67 rated for dust and water ingress, meaning it will float with the lens right up out of the water. AA batteries mean many more light hours for your dollars when compared to AAA, and as it's battery powered theres no need for external wiring and switching.

The i360 is Compatible with any RAILBLAZA StarPort, SidePort, RIBPort or RailMount, so can be mounted just about anywhere.

Features

• Designed and made in New Zealand
• 25 hours to 200 hours battery life
• 3 operation modes;
  Full brightness navigation mode 2NM up to 25hrs battery life
  Low brightness work mode up to 160 hrs battery life
  Flashing emergency Mode over 200hrs battery life
• Waterproof to 1 metre
• Floats with lens clear of water
• Powered by 3 x AA batteries, not supplied
• Meets USCG 2NM 33 CFR 183.810 & ABYC A-16
• Independently tested by Imanna Labs Inc, Florida
• Fits any RAILBLAZA mounting port, ordered separately.

The i360 meets the required standards for an all-round white navigation light for power and sailboats under 12 metres, and kayaks & canoes. It is also perfect as an anchor light.

This bait and fillet table from RAILBLAZA provides a sturdy station for cutting bait and cleaning or filleting fish, which can be easily attached to your boat or dinghy. 

The Fillet Table II is a tabletop station that can serve all your fish filleting and bait cutting needs. The rigid, injection moulded quality provides a sturdy and long lasting board that will function well for both you and your catch. 

The convenient size of 525x350mm (20.8x13.8”) means the Fillet Table II can be moved around and attached to multiple surfaces, including boat railings (using the RailMount 19-25) and dinghies. 

What You Get

1 x Fillet Table/Bait Board
2 x Adjustable Platforms
2 x StarPorts
2 x surface mount collars
2 x weather-tight gasket & covers
8 x 12-gauge x 20mm stainless steel screws
4 x 12-gauge 32 mm self-tapping screws
4 x M6 x 35 mm machine screws, washers & nuts

The E Series USB StarPort combines a USB connector within our StarPort base allowing you to charge your tablets, mobile phones and many other devices. It is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer.

Combine the E Series USB StarPort with the RAILBLAZA Mobi Mobile Device Holder, or ScreenGrabba iPad & Tablet Holder and you can hold your device and charge it.

Features

• StarPort
• Weather-tight gasket & cover
• E Series surface mount collars USB
• 12V to 5V 2.1A DC converter cable
• All required mounts and fasteners

ROHS compliant with CE and RCM certification you can connect this to any power system with confidence.

The E Series USB StarPort is splashproof however we do not recommend mounting in weather exposed areas.

The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water. 

The only thing better than a cold drink on a hot day (or vice versa), is having one within easy reach while on your boat, PWC or kayak any time you want it. The Drink Hold from RAILBLAZA is a convenient, easily attachable drink holding accessory for keeping your drink always within arms reach on the water. Made in New Zealand from high quality, UV proof plastic. Fit to boats, inflatables, kayaks, bass boat, yachts there’s no limit where these can be used

Features

• Made in New Zealand from high quality, UV proof plastic
• Fit to boats, inflatables, kayaks, fibreglass or even put it in a sheet winch!
• Fits any RAILBLAZA port, easily removed and stowed when not in use
• Holds bottles, coffee mugs & glasses

The Camera Mount Adaptor from RAILBLAZA is the safe and secure option for holding your camera or GoPro on any kayak, canoe, bass boat, yacht and more.

The RAILBLAZA Camera Mount Adaptor is an instantly portable, easy way to mount your device safely and securely anywhere you choose on your kayak, canoe, bass boat, or yacht. If you want to change your shot angle from bow to stern, vertical to horizontal, or simply to detach your camera for some hand held close ups, this is the fast and easy way move and reattach your device without hassle. Simply attach your device, and this camera mount will clip into any RAILBLAZA StarPort, SidePort, RIBPort or RailMount.

The RAILBLAZA Camera Mount Adaptor uses the universally compatible ¼ 20 thread screw which will easily attach your action camera or any device. This RAILBLAZA camera mount accessory also comes with a GoPro style tripod adapter, allowing you to mount your GoPro products or other well known digital camera brands to your kayak or boat with no troubles. 

Due to the versatile nature of all RAILBLAZA accessories, the Camera Mount Adaptor is easily moved, adjusted, transported, removed or stowed in seconds according to your needs. If you need to quickly run into a store for a last minute bait or tackle emergency, it’s a quick and easy action, unclip any RAILBLAZA accessory to keep it - and your attached device - safe in the boot of your car.

With two rotating R-Lock friction joints and a knuckle joint that tilts in 15° increments, the Adjustable Extender R-Lock adds great versatility. When coupled with one of RAILBLAZA's large range of accessories, it helps keep hold of your Fillet Table, fish finder, or any number of useful items.

When coupled with one of RAILBLAZA’s large range of accessories, the Extender is a great addition to help keep hold of your emergency torch or fishfinder, or any number of useful items.

NOTE: Extenders increase the force applied to a StarPort, they are not designed to have heavy loads applied. Extenders must not be used with a rod holder for trolling.

RAILBLAZA Platforms will fit into RAILBLAZA StarPort, or many sailboat winch handle receivers.

The Platform can be used as a flat surface to make many items StarPort compatible, meaning these items can all be plugged in and locked in place on your inflatable, kayak, sailboat or any other place that will take a StarPort.Once you have finished using the platform it can be removed and the StarPort can be retasked for another application.

Platforms are available in black or white and are sold individually, or as a kit complete with a StarPort.

The Oceansouth telescopic ladders mount to the deck of your boat and with its hinged mounts can be stored flat when not in use. 260mm step spacings.

Features

• Welded rungs with flat polymer tread
• 316 grade stainless steel fasteners and tubing
• High-polish 25mm stainless steel
• Heavy-Duty hinged brackets

Oceansouth ladders are the perfect boarding solution for any boat.

Features

• 3 Step
• Step spacings 260mm
• Ladder width 290mm
• High polish 25mm stainless steel 316 marine grade tube.
• Welded rungs with flat polymer tread.
• 316 grade stainless steel fasteners.
• Retaining Clip

LENGTH FOLDED  LENGTH EXTENDED
        670mm                  745mm

Oceansouth ladders are the perfect boarding solution for any boat.

Features - 

• Step spacings 260mm
• Ladder width 290mm
• High polish 25mm stainless steel 316 marine grade tube.
• Welded rungs with flat polymer tread.
• 316 grade stainless steel fasteners.

The  Oceansouth 'Clamp-on' Rocket Launcher has been designed to be used in conjunction with the Whitewater Bimini, however, it will team up with just about any bimini or canopy with framework 25mm.

Features

• Attaches to Biminis constructed with 25mm Tube
• Fits biminis up to 1.90m meters in (canopy width).
• Alloy knuckle clamps Rocket launcher firmly to bimini.
• All fasteners made from 316 stainless steel.
• Trim to suit your Bimini width.

Aluminium anodised 75mm shaft, powder coated cast 230mm base and Nylon top. 2 Sizes.

1500kg

3300lbs

RATED FOR TOWING (Not for Lifting Purposes)

• Material grade for shackle body is C1045 and pin is ISO: 41CR4 (or ASTM:5140)
• High quality carbon and alloy steel, drop forged and heat treated
• Galvanised and powder coated